3 Layer plastic film blowing machine

Good performancing of running and producing Good quality and flexile of film Energy saving and low consumption.

Multi layer coextruder blowing film 

3 layer co-extrusion blown film machine enjoys special advantages and can produce both HDPE film and LDPE film.It improves the physical toughness of film through multi-layer co-extrusion.With one main extruder providing material for outer and inner layer,it reduces one main extruder configuration and achieves energy saving and low consumption.

 Technical parameters:

Specification   model	SJ55×30+SJ55×30 -FMS1200(A+B+A)	SJ45×28+SJ55×30 -FMS800(A+B+A)
Screw Diameter(mm)	AØ55/B Ø55	AØ45/BØ55
Screw Ratio(L/D)	30:1	28:1&30:1
Heater Capacity(kw)	30	20
Driving Motor Power(kw)	A18.5/B22	A15/B18.5
Temperature Controller Panel(zone)	11	11
Take-up Roller Width (mm)	1200	800
Take-up Power(kw)	0.75	0.75
Take-up Speed(max.m/min)	0-80	0-80
Die Diameter(mm)	(Ø)120(A+B+A)	(Ø)100(A+B+A)
Air Blower Power(kw)	4	4

 

Film Width (mm)	400-1000	160-700
Film Thickness(mm)	0.02-0.10	0.02-0.10
Extrusion Output (kg/h)	100	90
AssemblingDimension(L×W×Hm)	6×3×6	5×2×5

 All these technical parameters can be varied with customers'request.

No further notice for any variation. 

3 Layer plastic film blowing machine